Technical data for Bukh DV32
    

Max continuous rating 
(ISO3046) at:
   
60 rps (3600 rpm) 32 HP (23.5 kW)
50 rps (3000 rpm) 28.3 HP (20.8 kW)
40 rps (2400 rpm) 23.2 HP (17 kW)
33 rps (2000 rpm) 19 HP (13.9 kW)
Reverse-reduction gear ratio 3:1  -  2.5:1  -  2:1
Engine rotation (looking forward) Anti-clockwise
Propeller rotation (looking forward) Clockwise
Number of cylinders 2
Bore x stroke 3.35 x 3.35 in
(85 x 85 mm)
Swept volume 58.82 cu in (964 cm³)
Operating principle 4-stroke, diesel
Turbo charge pressure 0.8 Bar (11.6 psi)
Cooling system (standard) Direct seawater
Max inclination, fore and aft 12°
Max heel, continuous 25°  
Fuel consumption, full load 1.65 imp galls/h (7.5 l/h)  
Fuel consumption, cruising 0.94 imp galls/h (4.3 l/h)  
Electric starter motor 12V - 1.36 HP (1.0 kW)  
Charging alternator 14V, 50Amp, 700W  
Net weight 481 lbs (218 kg)  
STANDARD EQUIPMENT:
Turbocharger
Reverse-reduction gear 
Raised handstart
Decompression lever
Wet sump lubrication system
Pre and main (full flow) filter
Automatic injection timing
Centrifugal governor
Seawater cooling with thermostat
Air inlet filter and silencer
Fuel lift pump
Electric start and charging alternator 
Remote operating panel with: Charging light, luboil pressure warning light, cooling water 
temperature warning light, key switch for start and electric stop and audible warning 
Fittings for remote control
Zinc anode protection
Drain pump for luboil 
Flexible engine mounts
Watercooled exhaust bend
Watercooled exhaust manifold
Designed for remote control
Standard set of tools
Operating manual

As Aabenraa Motorfabrik is always endeavouring to improve the engines, specifications
mentioned are subject to alterations without previous notice.